Google
×
Aim is performed with a single eye open (in order to reduce error) with the red dot directly on the center of the target (no manual adjustment of the shot is ...
If you don't want your writing to be edited mercilessly, then don't submit it to the MyInk Wiki. Consider, instead, to submit it the Airsoft SpecOps Forums, ...
Tips on Changing the Inner Barrel. I have been changing the inner barrel of my gun out a lot recently to run some velocity, accuracy, and precision tests.
Place the Weaver rail on the mock silencer, where you want it attached. Use the punch to make the drilling mark. Then use the drill and drill bit to make the ...
Conclusion. Based on Observation: Longer inner barrel length results in higher velocity. Based on Analysis: Changing the length of the inner barrel results in ...
On the other hand, when you increase FPS by changing to a longer barrel, you'll want to get a longer mock silencer or external barrel to hide it. Taking the ...
As the video below points out, the 13mm positive to 14mm negative creates a minor problem of tightening the mock suppressor loosens the adapter. My advice tip..
In this article, we will use a controlled, simulated environment to determine whether the difference in inner barrel length makes any real world difference in a ...
However, in our Reduce Inner Barrel Flex with a Mock Silencer accuracy and precision test, we found that inner barrel movement and flex makes a big deal. So ...
The inner barrel on a airsoft gun is the precision chamber that guides the BB pellet to the outside world. The end of the inner barrel with the notched hole ( ...