There are two possibilities when you pull the trigger and the airsoft electronic gun (AEG) makes a clicking noise. It's a faint noise, so if you don't ...

First thing to do is to remove the motor from the handgrip and see if the battery, motor, and wires are good. After pulling the motor out, the motor tuns with ...

After explaining the trigger post failure to my friend, he suggested drilling and tapping the gearbox to use a screw as the trigger post. That was a great idea.

Resetting a Locked Version 2 Gearbox. If your AEG airsoft gun suddenly stops working, it could mean several things: Battery is dead. Motor is burnt.

Motor powers the gearbox and makes your airsoft gun fire. Two connectors on the back side of the motor connect the positive (red) and negative (black) wires on ...

Just make sure the 90 degree adapter clears the gun. Some 90 degree Picatinny rail adapters allows you to screw addition rails to the top. That gives you the ...

Unscrew all of the screws on the gearbox (see photo below). If you can't remove the spring first, hold the gearbox shell down as you unscrew the last screw.

In this article, we are going to show you how to comply with the laws. Comments & Discussion >>. Pistols. Based on the new laws, an airsoft handgun requires the ...

Found a box of brand new 18650 Lithium Ion batteries today (see photo below). ... Maybe these batteries will work for airsoft, RC cars, or other fun hobbies.

In order to disassemble the rest of the gun, the mock silencer have to be removed. However, it is glued on. Therefore, the only way to remove it is to use a ...