Possibility 1: The battery is low on power. The clicking noise means the battery is turning the motor; as the motor turns, the pinion gear on the motor hits ...

At the bottom of the hop-up, BB pellets is fed through the opening into the main hop-up chamber. The lowest gear, out of the three, is accessible from outside ...

May 27, 2014 · Using the heavier BB causes the BB to curve down slightly. A slight upward hop-up adjustment made it shoot straight onto the red dot. Jake Tue, ...

First thing to do is to remove the motor from the handgrip and see if the battery, motor, and wires are good. After pulling the motor out, the motor tuns with ...

It has a stock plastic H-hop spacer. The adjustment is accomplished with 0.2g BB's. We will replace the inner barrels without touching the hop-up adjustment, ...

Jan 28, 2011 · ➢ NO 8mm bb weapons. ➢ Only TWO magazines or shotgun shells can be used in any mission. ➢ NO more than 50rds allowed per mission OR. ONLY ...

It's possible that your motor pinion gear has jammed in the gearbox. By removing the motor, you could have reset the lockup already. Try putting the motor and ...

Its purpose is to feed the airsoft BB's up the magazine into the airsoft gun. This magazine type is easy to load--pour the BB's into the relatively large ...

Most airsoft grenades shoot airsoft BB's. The idea is to launch a shower of BB's to simulate grenade explosion with a radius. However, there grenade shells ...

After all, the claim is that a plastic BB is much softer than a glass BB. But with so many Internet reports of glass sights and scopes being shot out in airsoft ...