Possibility 1: The battery is low on power. The clicking noise means the battery is turning the motor; as the motor turns, the pinion gear on the motor hits ...

First thing to do is to remove the motor from the handgrip and see if the battery, motor, and wires are good. After pulling the motor out, the motor tuns with ...

That is because the safety pin no longer prevents the contact switch from snapping backward. This is actually a very reliable side-effect.

Resetting a Locked Version 2 Gearbox. If your AEG airsoft gun suddenly stops working, it could mean several things: Battery is dead. Motor is burnt.

Motor powers the gearbox and makes your airsoft gun fire. Two connectors on the back side of the motor connect the positive (red) and negative (black) wires ...

Use your right thumb on the forward assist button. The receiver should separate with some pressure. Comments & Discussion >>. Removing the Handgrip. On a ...

I attempted to fire a HPEG and a LPEG. Unfortunately, neither fired. You can hear the gears clicking, but the 18650 batteries just doesn't provide enough ...

Set the gun to continuous firing mode. Pull and hold trigger until you hear three beeps (about five seconds after holding the trigger).

We are going to illustrate the disassembly process with the JG UA-3 RAS AEG. That is because the JG UA-3 RAS is a Steyr AUG A2/A3 variant with the quad-rail up ...

This last method requires your airsoft handgun to be transparent or translucent (see photo below). You can't really modify your airsoft gun to be transparent or ...