Playing around with my spare M4 shoulder stock, I decided to try fitting it onto my JG MP5. But the screw for it was too short for the MP5 receiver. So I went to Lowes to find a 4" version.
Turned out that the screw was M5-0.8x50mm. It was practically impossible to find. And I needed something like 75mm to 100mm.
Back to the drawing board.
Wed, 25 Feb 2015 08:17:06 +0300
Went to Home Depot for a different errand today. Get a bolt for my APS ASR106 Mini Patriot M4. The bolt spec is M5-0.8x40mm.
Fri, 30 Dec 2016 04:49:14 +0300
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.