The Well R-4 is a well-made MP7 replica. But the orange tip looks quite out of place. Luckily it is fairly easy to remove. If you look closely, you'll see that it's held in place with a pin (see photo below).
Punch out the pin with a strong strike on the punch with a rubber mallot. It's easier to do this with the front barrel tip detached from the gun.
Mon, 13 Oct 2014 21:23:05 +0400
With a bit of wiggling, the orange tip will come off. It's only held on by a small bit of glue. The orange tip is a fairly tight fit, so you can actually put it back on for transportation and then remove it at the airsoft field.
Mon, 13 Oct 2014 21:24:30 +0400
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.