33 Users Online
The H&K UMP has a positive 13mm internal thread. You will reveal this thread when you remove the orange tip with a heat gun and a pair of pliers. You can get a 13mm positive to 14mm negative adapter to put a standard airsoft thread on the H&K UMP. As the video below points out, the 13mm positive to 14mm negative creates a minor problem of tightening the mock suppressor loosens the adapter. My advice tip... find a 13mm positive to 14mm positive adapter and use positively threaded muzzle devices.
Tue, 16 Dec 2014 00:39:36 +0300
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.