Oct 19, 2013 · Excerpt: The o-ring for an airsoft electronic gun (AEG) cylinder head is the same as the AEG piston head. It is #14, which is 15/16 In. OD x ...

Nov 13, 2013 · Seal the cylinder head nozzle with your finger. Push the piston with the o-ring into the cylinder. You should not be able to push the piston ...

... cylinder. Now it's time to seal the AEG piston head to the cylinder. Put a finger over the air nozzle. Push the piston into the cylinder. As soon as it has ...

O-Ring for AEG Piston Head The piston head oring it not #14 size , 15/16 o-ring measure 23.813 mm the correct o-ring size for mariu compatible cylinder head ...

Long story short, it turned out that by introducing this o-ring between the metal hop-up unit and the metal gearbox, it created a gap between the air nozzle and ...

I finally took apart my Echo1 Red Star IGOR last night to upgrade it. It has a version 3 gearbox, but the cylinder head is not version 3. I have attached the ...

Examining the trigger mechanism, I realized that the trigger post is molded as part of the gearbox. It prevents the trigger contact switch from traveling too ...

If your AEG airsoft gun suddenly stops working, it could mean several things: Battery is dead. Motor is burnt. Wires are bad. Gearbox is locked. This ...

The clicking noise means the battery is turning the motor; as the motor turns, the pinion gear on the motor hits the next gear, making the clicking sound. But ...