After being plagued with this problem, my friend has came up with a simple solution (see photo below). Using a paper clip that's cut into many pieces, he fits ...

Disassemble all of the pieces from the ambidextrous part. But don't remove the hinge pin. Insert the latch on the left side of the M4. Carefully drop the spring ...

Insert your thumb in between the magazine release paddle and the magazine. Then pull the magazine downward to remove. WARNING Do not remove the AK Adapter for ...

It's usually not hard to fix. You just have to disassemble it and fix the problem. This article shows you how to take apart the MP5 high-cap magazine. To ...

Insert your index finger in between the magazine release paddle and the magazine. Then pull the magazine downward to remove. WARNING Do not remove the VSS to ...

Place the safety pin loop onto the spring post, then wedge the leg in between the trigger and contact switch. The photo below shows the correct installation. ...

Sep 22, 2013 · The solution floating around the web and in the videos is to enlarge the cavity where the spring housing inserts into the magazine well. I think ...

Insert your index finger in between the magazine release paddle and the magazine. Then pull the magazine downward to remove. WARNING Do not remove the VSS to ...

Use a precision screwdriver to unscrew the magazine release button. ... Pull the gearbox out of the receiver slightly until you have revealed the latch (see photo ...